Invacare Softform Active 2 Manuel D'utilisation page 22

5 MAINTENANCE AND TROUBLESHOOTING
4. Ensure that the underside of the mattress is clear of all sharp objects.
5. Examine the surface of the power unit and mattress assembly components for visible blood or body fluids.
6. Perform one of the following:
• If blood is present, decontaminate the product.
i. Remove all visible soil with disposable paper towels.
ii. Scrub the area with freshly prepared effective detergent disinfectant solution.
• If blood is not present, remove any soil from the cover with paper towels.

If soiled, the cover should be removed, cleaned and decontaminated.
7. Perform the following steps to clean the mattress cover:
A. Using a damp single use wipe, scrub the area with a solution of neutral detergent and hot water.
B. Rinse cover with clean water using a damp single use wipe.
C. Thoroughly dry cover.
D. Remove the cover and launder it using the following method:
CAUTION
Laundry workers should always wash their hands before working with clean bedding.
Do NOT overload the machine.
Do not use chlorine bleach because it may damage the fabric coating.
High air temperatures will damage the fabrics and void the Invacare warranty.
i. Place the cover in a washing machine.
ii. Wash with warm water below 176°F (80°C).
iii. Add diluted detergent and disinfectant according to the manufacturer's instructions.
iv. Remove excess water.
Invacare® Softform Active™2
22
Part No 1171748