Operation; Installing The Side Rails; Installing The System; Installing The Power Unit - Invacare Softform Active 2 Manuel D'utilisation

4 Operation

4.1

Installing the Side Rails

WARNING
Refer to the Bed Rail Entrapment Risk Notification Guide at www.invacare.com for additional safety information.
Mattress MUST fit bed frame and side rails snugly to prevent patient entrapment.

Refer to the instructions provided with the side rails for the installation procedure.

4.2 Installing the System

Installing the Power Unit

1. Rotate the bed hooks on the back of the power unit into position.
2. Place the power unit on the footboard.
 If the bed does not have a footboard, place the
power unit on a flat surface, leaving room for the
hose to hang down.
Part No 1171748
Bed Hooks
FIGURE 1 Installing the System
13
4 OPERATION
Power unit
Invacare® Softform Active™2