Table des Matières
Publicité
Step 1: Take out the machine from box and put it on the flat floor. (As shown)
Step 2: Hold the console and raise the upright post, then lock the upright post to the base frame
with 2pcs of Allen C.K.S. half thread screw（M8*35*20. Then lock the console to upright post
with 2 pcs of Hexagon socket head full thread bolt（M8*12）
Step 3: Raise up the consoel, lock the console well with TAB bolt.
FYTTER |WWW.FYTTER.COM
PAG- 18
Publicité
Table des Matières
