Wiesel Speedline ® Wh 50, Wh 80 And Wh 120 - THOMSON WH40 Instructions De Montage

2.2 WIESEL SPEEDLine
Fig. 2: WIESEL SPEEDLine
No.
1
2
WIESEL SPEEDLine
groups:
The sliding carriage (1) is used as assembly and mounting surface for the load to be
moved.
Tubular section with sliding bars (2)
Toothed belt drive with drive (3) and tension mechanism (4)
The toothed belt is usually driven by a flanged electric motor.
The motor can either be flanged directly or mounted via an angular gear.
The end and stop points can be controlled by various measuring systems (shaft encoder,
resolver, glass scale etc.). In addition to the control-driven limit switches, electromechanical
sliding safety limit switches can be fitted at the end points (see chapter 4 "Mounting a linear
drive unit").
Lubrication is by a central grease nipple and lubricating felts (optional) (see chapter 8.1
"Lubrication").
®
WIESEL SPEEDLine
®
®
WH 50, WH 80 and WH 120
Name
Sliding carriage
Tubular section with sliding bars
®
WH 50, WH 80 and WH 120 consist of the following component
42/08
WH 50, WH 80 and WH 120
No.
3
4
Product description
Name
Toothed belt drive with drive
Tension mechanism
29