Wiesel Speedline ® Wh 40 - THOMSON WH40 Instructions De Montage

Product description
2.1 WIESEL SPEEDLine
Fig. 1: WIESEL SPEEDLine
No.
1
3
4
WIESEL SPEEDLine
The sliding carriage (1) is used as assembly and mounting surface for the load to be
moved.
Toothed belt drive with drive (3) and tension mechanism (4)
Guidance system (5,6)
The toothed belt is usually driven by a flanged electric motor.
The motor can either be flanged directly or mounted via an angular gear or a timing belt drive.
The end and stop points can be controlled by various measuring systems (shaft encoder,
resolver, glass scale etc.). In addition to the control-driven limit switches, the safety limit
switches must be fastened by the user! (see chapter 4 "Mounting a linear drive unit").
Lubrication is by a central grease nipple (see chapter 8.1 "Lubrication").
28
42/08
®
®
WH 40
Name
Sliding carriage
Toothed belt drive with drive
Tension mechanism
®
WH 40 consist of the following component groups:
WH 40
No.
5
6
Name
Guidance system
Guidance system
WIESEL SPEEDLine
®