Storage; Examples Of The Communications Network - Ingeteam INGECON EMS Manager Manuel D'installation Et Usage

Ingeteam
Three-phase installations
* The INGECON EMS Manager allows, in any case, communication with each of the units via Ethernet.

4.3. Storage

The inverter/charger of a single-phase
In the case of three-phase installations, communication via Ethernet with the inverter/charger of each phase is
necessary.

4.4. Examples of the communications network

Included In the following diagrams are:
• Communications network cabling.
• System communication with the INGECON EMS Manager.
• Network configuration (by way of example).
• Modbus addresses of the RS-485 network (by way of example).
• Internet connection*.
* It is not required to control the system.
Ingeteam recommends that there is access to the Internet with an aim to being able to remotely
access the installation. See the section "6. INGECON EMS Tools" for further information.
42
Single-phase inverters
1 unit per phase Several units per phase*
Via Ethernet with a unit of
each phase and RS-485
Via Ethernet. communication between
all the units of the same
installation
will communicate via Ethernet with the INGECON EMS Manager.
1 unit
Via Ethernet.
phase.
AAX2019IQM01_A - Installation and usage manual
System interconnections
Three-phase inverters
Several units*
Via Ethernet with
a unit and RS-485
communication between
all the units.