Other 2/2 Screen - Panasonic AW-HE50HE Mode D'emploi

Setting the menu items
w Other 2/2 screen
w
Ot h e r 2 / 2
Tall y E n a b l e
OSD Of f W i t h T a l l y
OSD St a t u s
Wire le s s C o n t r o l
Retu rn
Tally Enable [Disable, Enable]
"Enable" or "Disable" is set here for the function which
turns on or turns off the tally lamp using the tally control
signal.
OSD Off With Tally [Off, On]
This is used to enable or disable the function for clearing
the OSD menu displays when the tally signal is received
by a command or contact.
When the tally signal is released, the original OSD menu
displays are restored.
OSD Status [Off, On]
"On" or "Off" is set here for the status display which
appears during AWB operations.
Wireless Control [Disable, Enable]
"Enable" or "Disable" is set here for operations conducted
from the wireless remote control.
The operations are enabled when the unit's power is
turned on from an external device other than a wireless
remote control, and they are disabled when the power is
turned on from a wireless remote control.
p At the point when this item's setting is changed, the
new setting is not reflected in operation.
It is reflected when the unit is set to the standby mode
and its power is turned on.
Follow one of the procedures below if the item's setting
is changed by mistake and the unit can no longer be
operated from a wireless remote control.
p When menu operations can be performed using
another control device:
First change the item using a control device capable
of performing menu operations, and then turn off the
unit's power and turn it back on.
E n a b l e
O f f
O f f
E n a b l e
Return
46 (E)
p When menu operations cannot be performed using
other control devices:
1. Turn off the power of the units and devices that are
connected.
2. Disconnect the unit's power cable, and plug it back
in.
3. Perform the operation for turning on the unit's
power from the wireless remote control.
4. After changing this item, turn off the unit's power
and turn it back on.
Use this to return to the previous menu.