Panasonic AW-HE50HE Mode D'emploi page 36

Basic operations
q Procedure for camera menu operation (AW‑RP555)
w
1
Press one of the [1] to [5] buttons of
[CONTROL] to select the unit which is to be
operated.
2
Press the [MENU] button of the AW‑RP555 for
2 seconds.
The camera menu of the AW‑HE50 is displayed on the
monitor.
3
Perform one of the following steps to select
the menu item.
If the [YES] button is pressed, the selection item moves
up; if the [NO] button is pressed, it moves down.
4
Press the [ITEM] button.
The value of the item to be set starts blinking.
5
Press the [YES] or [NO] button to change the
setting.
6
After deciding on the setting, press the [ITEM]
button.
The value of the item to be set is entered, and it stops
blinking.
7
Press the [MENU] button for 2 seconds to exit
the camera menu.
Note
w p It may be necessary to upgrade the software version
in order to operate an AW‑HE50 from an AW‑RP555.
Ask your dealer for details.
35 (E)