Panasonic AW-HE50HE Mode D'emploi page 21

Preset memories
When the AW‑RP555 is connected:
Up to 10 settings can be registered and called.
The [1] to [10] buttons of [PRESET] correspond to the unit's
preset memories No.1 to No.10.
q Registering the settings in the preset memories
w
1
Display the picture to be shot on the monitor.
Operate the [PAN/TILT] lever and [ZOOM] lever to
determine the camera angle.
Adjust the focus, iris, gain and white balance if they
need to be adjusted.
2
Hold down the [MEMORY] button.
The buttons among the [1] to [10] buttons of [PRESET]
in which settings can be registered now start blinking in
sequence.
3
With the [MEMORY] button still held down,
press the button of the preset memory number
in which the setting is to be registered.
q Calling the settings of the preset memories
w
1
Press the button among the [1] to [10] buttons
of [PRESET] in which the desired setting was
registered.
When the AW‑RP50 is connected:
Refer to the Operating Instructions of the controller.
20 (E)