Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Safety Symbols ............................................................ .3
Work Area Safety .......................................................... 3
Extension Cords ............................................................ 3
Grounding Instructions .................................................. 4
Personal Safety ............................................................. 4
Tool Safety ................................................................... 5
Service Safety ............................................................... 5
Specific Safety Instructions for Tile Saw
................................................................. 7
Unpacking The Saw
..................................................... 8
Shipping Contents ........................................................ .8
Hardware Contents ....................................................... 9
....................................................................... .9
Install the Water Tray ................................................... .9
Attach the Saw Arm Assembly ........................................ 9
Attach the Worktable ................................................... 10
Attach the Splash Trays ............................................... 10
Install the Table Extensions ......................................... 11
Attach the Miter Guide ................................................. 11
..................................................................... 12
Lubricating Blade ........................................................ 12
Turning the Saw On and Off ......................................... 13
................................................................. 14
Parallel Cut ................................................................. 14
Angled Cut ................................................................. 15
Bevel Cut.................................................................... 15
Plunge Cut.................................................................. 15
Adjusting Depth of Cut ................................................ 15
NOTE:
The manual cover illustrates the current production model. All other illustrations contained in the manual are representative
only and may not be exact depictions of the actual labeling or accessories included. They are intended for illustrative purposes only.
Power Supply
Motor Capacity
No-load Speed
Diamond Cutting Wheel Size
Maximum Depth Cut at 0°
Maximum Depth Cut at 45°
Tilting Range
Maximum Rip Cut
Maximum Square Tile of Diagonal
TABLE OF CONTENTS
............................................. 2
....................................... 3
................ 5
................................... 12
TECHNICAL SPECIFICATIONS
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
If tool is loaned to someone, also loan them these instructions.
................................................................ 16
Changing the Blade ..................................................... 16
Checking the Bevel ...................................................... 17
Cleaning the Pump ...................................................... 17
................................................................ 18
........................................................ 19
...................................................................... 20
..................................................... 20
French
........................................................................... 21
Spanish
......................................................................... 41
120V, 60Hz
13A
5,300RPM
7" Dia.X5/8" (Bore)
2-3/8"
1-1/4"
0°,22.5°,45°
24"
18"
2
................ 20
Publicité
Chapitres
Table des Matières
