Product Features - Eccotemp iE Série Manuel D'utilisation Et D'entretien

Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483

PRODUCT FEATURES

The Eccotemp iE Electric tankless water heaters include patented technology with multi-safety devices, including
the following features:
1. Tankless, instantaneous heating for on demand hot water, No pre-heating. No stand-by heating loss. Energy-
saving.
2. Micro-computer control, adopting patented heating technology. Water is completely separated from
electricity by multi-layers of composite nano insulation material.
3. Over-heating thermal cut-off to avoid scalds. Once outlet water temperature reaches 153(degree symbol)
F/67(degree symbol)C, the electricity is automatically cut off. If this occurs, the screen will beep and display
an E1 error code.
4. Malfunction sensor. If there is a malfunction wit the temperature sensor, the heater will stop working and
display an E3 error code.
5. Dry-heating thermal cut-off. In case of dry heating, the unit's electricity will be cut off and it will display an E4
error code.
6. Eccotemp Product Advantage: Eccotemp iE heating elements are made from a single piece of cast aluminum;
so there will never be water leakage, non electric leakage in the heating chamber.
RECOMMENDED USES
iE-11 - Rated at 1.8 GPM @ 40 degree temperature rise
1 to 2 single applications such as single shower, sink, washer, dishwasher located in warmer climates averaging incoming water
temperatures above 65 degrees F.
Not recommended: multiple applications; colder climates averaging water temperatures 50 degrees F or lower.
iE-15B - Rated at 1.8 GPM @ 40 degree temperature rise
Single, stand alone point of use application such as a sink, washer, single shower located in warmer climates averaging
incoming water temperatures above 65 degrees F.
Not recommended: multiple applications; colder climates averaging water temperatures 50 degrees F or lower.
iE-15A - Rated at 2 GPM @ 40 degree temperature rise
Single point of use application such as stand alone sink, washer, single shower located in warmer climates averaging incoming
water temperatures above 65 degrees F.
Not recommended: multiple applications; colder climates averaging water temperatures 50 degrees F or lower.
iE-18 - Rated at 2.5 GPM @ 40 degree temperature rise
1 to 2 single applications such as single shower, sink, washer, dishwasher
Not recommended: cold climates averaging water temperatures 50 degrees F or lower; not intended for use on more than 2
applications at once.
iE-24 - Rated at 3 GPM @ 40 degree temperature rise
Small cabin, apartment, office, or any other small dwelling with 2 applications or less.
Not Recommended: whole home installation or multi family dwelling; not intended for use on more than 2 applications at
once.
iE-27 - Rated at 3.5 GPM @ 40 degree temperature rise.
Medium to small 3 bedroom, 2 bath homes (ideally under 2500 square feet); any other dwelling with 3 applications or less.
Not Recommended: large homes or any other large dwelling; not intended for use on more than 3 applications at once.
PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANYTIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK
2
Product Support: Eccotemp.com/help-desk
AT WWW.ECCOTEMP.COM FOR ALL OF OUR PRODUCT MANUALS.
Shop Online: Eccotemp.com/products Store Locater: Eccotemp.com/locater