Installation - Firex PMK G Série Manuel D'installation, D'emploi Et D'entretien

− Remove all the packaging and check that the appliance is in perfect conditions. In case
of visible damage, do not connect the appliance and notify the sales point immediately.
− Remove the PVC protection from the panels.
− Dispose of packaging according to regulations. Generally material is divided according
to composition and should be delivered to the waste disposal service.
− Maintain a distance of 5 cm between the back (chimney) of the appliance and the wall.
There are no particular prescriptions regarding side distances from other appliances or
walls, however it is advisable to leave enough space in case of maintenance and/or
repairs. It is advisable to fit a suitable heat insulation if the appliance is in direct contact
with inflammable walls.
− The appliance must stand level. Small differences in level can be eliminated by
screwing or unscrewing the adjustable feet: A significantly uneven or sloping stance
can affect the operation of the appliance adversely.
Warning! : Only qualified technicians must perform the installation, maintenance
and test of the appliance.
Warning! : Before connecting any parts of the appliance to supplies, make sure
that the latter is equivalent the requirements stated in the technical data
plate, if the appliance has been designed for these supplies.
Instruction manual for installation, maintenance and use
Gas Kettles PMK.G...
2.1. POSTIONING

2.2. INSTALLATION

PMK.G-GB-07
Page
11 di 36