Maintenance - Storage - Assistance - Disposal; Instructions For Replacing The Saw Blade (Fig. 9) - Femi 780XL Instructions D'installation Et D'entretien

DANGER - CAUTION
• NEVER bring hands anywhere near the cutting zone until the head has returned
to its full height and the blade has come to a complete standstill.
• Let the cut piece fall onto the base of the machine.
NOTES
At the end of the work process the machine stops automatically.
If necessary the machine can be stopped by pressing the kill switch (16 - Fig.1).
f. Lift the head as far as it will go.
DANGER - WARNING
IN THE EVENT OF EXCESSIVE CUTTING PRESSURE THE CURRENT LIMITER OR
THE THERMAL CIRCUIT BREAKER WILL TRIP.
LESSEN THE CUTTING PRESSURE TO SAFEGUARD THE MACHINE.

5. MAINTENANCE - STORAGE - ASSISTANCE - DISPOSAL

NOTES
Routine maintenance operations which can be performed by the user are described
below.
Have the machine repaired by expert personnel only. This machine complies with all
the relevant safety prescriptions. Repairs to the machine must be carried out by skilled
personnel only using original spare parts. Failure to observe this recommendation could
jeopardize user safety.
DANGER - WARNING
• BEFORE PERFORMING ANY MAINTENANCE WORK, PLACE THE MACHINE IN
SAFETY CONDITIONS AS DESCRIBED IN HEADING "SAFETY PRECAUTIONS
DURING USE".
• PLACE THE POWER CABLE IN A COIL NEAR THE MACHINE.
5.1.

INSTRUCTIONS FOR REPLACING THE SAW BLADE (Fig. 9)

DANGER - WARNING
WEAR PROTECTIVE GLOVES.
Tools required:
Suitable Allen keys and/or Phillips screwdrivers are needed to replace the blade.
EN
Cont....
33