Arneg Sendai Manuel D'installation page 38

Sendai-SendaiR290
English
11 Adjust the feet to 25mm.
Max 25mm
After adjustment, check that the
two bases are level.
12 Adjust the height of the cabinets
using the removable supports (P).
13 Fix the cabinets using the
lower supports 1-3, with the
screws provided 2 .
14 Insert the polystyrene provided with the kit
into the internal area on the sides of the
cabinets and fix it in place with double-
sided tape.
15 Apply adhesive insulation (R)
provided with the kit to the
connection sheets (Q) to avoid
any dripping inside the cabinet.
N.B.Make sure that the connection
air channel between the two
cabinets remains open.
38
CANALIZZAZIONE FRONTE-RETRO / FRONT-BACK MULTIPLEXING
P
2
1
3
Q
05060048 01 13/06/2012
P
R