Connecting the Cable to Indoor Unit
• The inside and outside connecting cable can be connected after opening the inlet grille.
1. Open the inlet grille manually.(Fig.1)
2. Open the terminal block cover with driver(
3. Connect the cables(LG doesn't sypply) to the Terminal Block in the front Bracket. (Fig.2)
4. Secure the terminal block cover to the original position with the screw.
5. Knock off the hole for connecting wires (Fig. 3).
6. Close the inlet grille.
(Fig.1)
Detail Wiring of Fig.2
(Fig.3)
).
(Fig.2)
H/P Model
1(L) 2(N)
3
4
To outdoor unit
Knock off
Installation of Unit
Installation Manual 13