Combinationen For Cv29; Operation With A Dcc Command Station; Pro; More Functions - Roco BR 03.10 Série Manuel

▪ Combinations for CV29
CV29
Direction of

▪ Operation with a DCC Command Station

As the multi MAUS/ multi MAUS
operated.
Programming modes:
The locomotive and carriages react to all DCC programming modes.
We recommend: direct CV programming (byte by byte) or POM mode (programming on main track).
The programming is described in the multi MAUS/ multi MAUS
Reading CVs:
With the appropriate equipment (e.g. Rocomotion 10785 / multi zentrale
by byte and bit by bit.

▪ More Functions

You can find out about a range of other possible set-tings, which are probably very rarely needed, rela-
ting to drive speed curve, load control setting or noise synchronization from the detailed handbook.
This can be downloaded as a pdf document MX6462P from www.zimo.at
8072207920.indd 29
Bit 0 Bit 1
Speed Steps Operating Mode
Travel
normal 14
other way 14
round
normal 28/128
other way 28/128
round
normal 14
other way 14
round
normal 28/128
other way 28/128
round
has 20 function keys and a light button, can be especially comfortably

pro

Bit 2
Short adresse
digital
digital
digital 2 (default)
digital
analogue+digital
analogue+digital
analogue+digital
analog+digital
(
multi MAUS/ multi MAUS
manual.
pro
pro
Bit 5
Value Value
Long adresse
0 32
1 33
34
3 35
4 36
5 37
6 38
7 39
)
pro
), you can read the value byte
25.02.2015 10:33:36
29
29