Nordcap LINUS 100 Mode D'emploi page 5

Operator's guide:
1. Handling and Unpacking
2. Connection to the electric network
3.1 Directions
3.2 Allowed uses
4. Description of the main elements
4.1 C ontrol
4.3.1 Thermostat digital regulator
5. Putting into operation
5.2 Periodical defrosting
WARNINGS
!
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety.
1. Adults should operate this appliance only. Do not allow children to use the controls or play with it. 2
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
installation of the appliance should be carried out by a qualified electrician or other competent person.
4 . Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
5
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs. 6
7
. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without
prior notice. 8 . Avoid installing the cabinet directly in line with sunlight. . Nevere install the appliance
near sources of heat, such as radiators, stoves, etc.
for at least 30 cm. 11 . Ensure that the products displayed on the shelves and grills do not hang over the
12
edges. . If damp air or products to be refrigerated should cause ice to form on the evaporator, we
recommend stopping the compressor and placing the goods in special refrigerated containers, kept at the
same temperature, until defrosting is completed;if this is not carried out the compressor will continue to
operate leading to a wasteful consumption of electricity and poor performance.
working and unused, it is indispensable to keep the door open at least 10 cm.
1. Handling and Unpacking
After unpacking check the integrity of the various elements before going ahead with installation, in the
event of damage or defective components address to professionally qualified personnel.
2. Connection to the electric network
Before carrying out the electrical connection make sure that the specifications of the rating plate
correspond to the values of the electric power supply mains. The rating plate is located on the top of the
display cabinet. To ensure electrical safety it is necessary to make sure that the display cabinet is
correctly connected to an effective earthing system. For this purpose use the screw marked with the
symbol. In case of doubt ask for the assistance of qualified personnel.
If the socket to be used doesn't fit with the appliance's plug, have the socket replaced with a suitable one
by a specialized technician. If you need to use adapters, multiple sockets, and/or extensions, you have to
use only components in conformity with the current safety standards (EN 60204) according to the
electrical characteristics of the display cabinet.
3.1 Directions
This manual is an integral part of the product. It is recommended to read all the information and
instructions contained in this manual carefully before starting to use the display cabinet since it contains
essential information about the safe use and service of the machine. Keep this manual carefully inorder
to be able to refer to it whenever you need it. All the personnel assigned to using this machine must be
trained to use it.
3.2 Allowed uses
The refrigerated display cabinet has been designed and manufactured to be used to conserve foodstuffs,
confectionery or beverages at a temperature of a few degrees above 0° c. The refrigerated display
cabinet must operate within the limits described in this manual and according to the instructions specified
in it. The machine should be destined only for the use it has been designed for, every other use is to be
considered improper and therefore unreasonable. The manufacturer is not liable for any damage to
persons or things caused by improper, erroneous, or unreasonable use. Any tampering or modification to
the appliance that has not previously been authorized by the manufacturer frees the manufacturer from
damage deriving from or referable to the above mentioned acts.
Operator's guide
5.3 Directions to prevent accidents
6. Cleaning and maintenance
7.2 Special maintenance
10
. Keep the ventilation grills free from obstruction
5
3
9
13
. If the appliance is not
I
UK
D
E
F
NL
P
. It
S
DK
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO