Kopp INFRAcontrol T 180 UP IP40 Mode D'emploi page 18

GB
Switching function (ON/AUTO/OFF)
AUTO: motion sensor works automatically in accordance with
the preset values.
ON: motion sensor is switched on for a maximum of 2 hours
(constant light).
Internal LED
flashes in rhythm
10
ON: 1 sec.
OFF: 5 sec.
After 2 hours, the motion sensor switches back to AUTO
mode. Even if the sliding switch is still on the ON position. To
switch on constant light again, switch the sliding switch from
ON to AUTO and then switch it to ON once more.
OFF: motion sensor is permanently switched off.
6
AUTO
ON OFF
ON
18
6
AUTO
ON OFF
AUTO OFF
Setting the twilight threshold
Carefully open the front cap.
Set the sliding switch auf Position AUTO stellen.
6
► Motion sensor with manually set brightness value:
Set the desired brightness value
screw, which is infinitely adjustable, from 5 to 300.
Adjustment screw to the stop on the right side
(300) means: day operation.
Adjustment screw to the stop on the left side (5)
means: night operation.
7
100
30
5
20sek.
5sek.
with the adjustment
7
Test
300
1m
Z
1
30
5