Kopp INFRAcontrol T 180 UP IP40 Mode D'emploi page 16

GB
Operating principle
1
The INFRAcontrol motion sensors are passive-infrared motion
sensor. The sensors of the INFRAcontrol motion sensor can
detect and evaluate invisible heat rays of moving bodies (hu-
mans, animals, etc.), and convert them electronically switch-
ing processes. However, heat rays cannot penetrate obstacles,
such as walls, glass panes, etc. This must be taken into con-
sideration when selecting a suitable installation location. If
possible, the motion sensor should be installed so that it is
protected against direct sunlight in order to prevent unwant-
ed switching processes.
Note: cover frame not included in the scope of delivery.
Installation instructions
The flush-mounted motion sensor is designed for installation
in flush-mounted boxes
.
1
The motion sensor can be attached in the flush-mounted
box with the aid of retaining clamps, or the support frame
can be screwed to the flush-mounted box by means of the
flush-mounted box machine screws.
16