Technical Data; Water Connections; Hydronic Module (Fig. 8/9/10) - Carrier AquaSnap 30RB Série Manuel D'installation

6 - TecHnIcal daTa

unit
Compressor Type
Water pump speed
Expansion Capacity
vessel
Nitrogen pre-charge
pressure
Net water volume

Water connections

Maximum water pressure
Refirgerant circuit High pressure
switch
Refrigerant R410A charge
Compressor oil type
Compressor oil amount
Sound power level
7 - WaTer connecTIonS

7.1 - Hydronic module (fig. 8/9/10)

The 30RB___- 9 units are equipped with an integrated
hydronic module with a variable flows pump self
controlled that allows fast installation with the aid of a few
external components. The 30RB__X9 units, on the other
hand, do not have a circulation pump and expansion
vessel. For this reason, they must be provided outside.
In any case, all the necessary protections and valves are to
be inserted in the water circuit inside the unit. Refer to
Figure 8 for the exact connection of the water pipes.
Figures 9 and 10 describe the integrated components in
their various configurations.
18
With hydronic module
008-9 012-9
1 Rotary
Variable speed
I
kPa 100
I 2.5
kPa
kPa No 4400
Kg 2.15 2.63
Type ESTER
OILVG74
ml 1100
dB(A) 68 70
30rB
015-9 008X9
1 Scroll 1 Rotary
2
1''M
300
No
3.18 2.15
FV68S ESTER
OILVG74
1700 1100
71
NOTE: The correct dimensioning of the expansion vessel
is left to the installer as a function of the type of plant.
NOTE: The discharge of the safety valve can be
channeled to the outside of the machine using the pre-cut
holes (see Fig. 4). In this case, it is necessary to provide a
open drain funnel.
Without hydronic module
012X9 015X9
1 Scroll
N.A.
N.A.
N.A.
1.0 2.3
4400
2.63 3.18
FV68S
1700
68 70 71