Uberhaus 70005007 Mode D'emploi page 44

10. Electronic Igniter Battery Installation
Unscrew the electronic igniter button and place the battery (V) into the housing with the positive
terminal (+) facing outward. Replace the ignition button after the battery has been installed.
As shown in Fig. 17.
Fig. 17
V
11. Install the Grease Tray
Install the Grease Tray (X) from the rear of the grill by sliding the tray on the glides at the rear of the
grill until centered under the cooking area .As shown in Figure 18
X
Fig. 18
16
PDF 文件使用 "pdfFactory Pro" 试用版本创建 ÿ www.fineprint.com.cn