Uberhaus 70005007 Mode D'emploi page 43

9. Side Burner Valve Installation
a) Remove the two 4mm screws with locking washers that are pre-attached
to the valve. Then place the Bezel (L) on the Side Burner Shelf (D) control
panel. From underneath, insert the side burner valve into the Side Burner Shelf (D)
control panel and Bezel (L). Align the holes in the Bezel (L) with holes in
the valve and attach with two 4mm screws. The two screws hold the bezel, control panel,
and valve together. As shown in Fig. 15.
Fig. 15
L
D
b) Insert Side Burner Control Knob (M) onto the valve (L) stem and tighten it. As shown in Fig. 16.
Fig. 16
L
M
15
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn