Uberhaus 70005007 Mode D'emploi page 38

3.Cart Assembly
a) Attach Cart Leg, Front Left (F) and Cart Leg, Back Left (G) with Cart Frame (H)
Using four 1/4-in. x 15-mm Truss Head Screws (CC) and four 1/4-in. Locking
Washers (DD). Make sure the flat side of Cart frame (H) faces out to the right when
attached. As shown in Fig. 5.
Repeat step 3a) to attach Cart Frame to the Cart Leg (BB).
b) Use 4pcs 5/32-32*10 screws to attach cart frame beam(A) into Back panel, Top(B). As show in Fig.6
PDF 文件使用 "pdfFactory Pro" 试用版本创建
G
H
F
B
Fig. ５
DD
CC
BB
Fig. 6
A
10
www.fineprint.com.cn