Speedlink Bullfrog SL-6541 Mode D'emploi page 8

Hardware Connection:
D
1. Plug the USB connector to your computers' USB port, Windows®
system may ask you to insert Windows® 98/ME/2000/XP CD to
GB
install a new device.
2. Click START then select CONTROL PANEL, click on GAME
F
CONTROLLER (GAME OPTIONS under Windows® ME).
E
Under Windows® XP you may have to click first on "PRINTER AND
OTHER HARDWARE" and then on "GAME CONTROLLER".
I
3. Click on PROPERTIES. In this panel you can test all functions of the
game pad. If they don't work properly, please calibrate the game pad.
For this click on "Calibration".
Note: Please note that USB operation is not supported by Windows®
95/NT.
Mode Selection:
Digital Mode (LED green):
The Digital Mode is the default mode. To change (back) to Digital Mode
you have to push the Analog button once or twice, when the analog
LED lights up green the Digital Mode is actived.
Digital Mode Functions:
D-Pad:
Left control stick:
Right control stick:
Note: The control stick buttons do not support auto fire.
Analog Mode (LED red):
To change(back) to Analog Mode, please press analog button once or
twice, when the analog LED lights red the Analog Mode is activated.
Analog Mode Functions:
Digital function of X and Y axis
Digital function of X and Y axis
Up = Button 1;
Right = Button 2;
Down = Button 3;
Left = Button 4
8