Battery Information; Replacing The Battery - Unitron Quantum in-the-ear Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Battery information

To replace the battery, fully open the battery
door for access to the battery compartment.
Low battery warning
Two long beeps indicate the hearing aid battery
is low. After the low battery warning, you may
experience some reduction in sound quality.
This is normal and can be remedied by inserting
fresh batteries into the hearing aids.
If you are not able to hear the low battery
warning, your hearing healthcare professional
can change the pitch or loudness of the low
battery warning. If you prefer, it can be turned
off entirely.
Your hearing aids are designed to generate a
low battery warning every 30 minutes until you
change the batteries, but depending on the
condition of the batteries, they may die before
another low battery warning occurs. Therefore,
it is recommended that the batteries are
replaced as soon as possible once you hear
the low battery warning.
12

Replacing the battery

Plus (+) signs
Plus (+) signs
1. Gently swing out the battery door with
your fingernail.
2. Grasp the battery with your thumb and
index finger and remove.
3. Insert the new battery into the battery
compartment with the plus (+) sign on the
battery facing the same way as the plus (+)
sign on the edge of the battery door. This
will ensure that the battery door closes
properly.
Note: If the battery is inserted incorrectly,
the hearing aid will not turn on.
4. Close the battery door.
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Quantum ite

Table des Matières