Volume Control - Unitron Quantum in-the-ear Mode D'emploi

Push button
Your hearing aids may be equipped
with a push button which can be set
for switching between programs, to
adjust your volume, or to adjust SmartFocus.
Program control
If the push button has been configured as a
program control, each time you push the button,
you will move to a new hearing aid program.
Your hearing aids beep to indicate which
program you are in.
Program 1
(e.g. Automatic Program)
Program 2 (e.g. speech in noise)
Program 3 (e.g. easy-t/telephone)
Program 4 (e.g. music)
Easy-t/telephone (see pg 26)
DuoLink (if enabled)
(see pg 24)
20
1 beep
2 beeps
3 beeps
4 beeps
short melody
Opposite ear beeps
the same as side
being adjusted

Volume control

If the push button has been configured as
a volume control:
Push the button on your right hearing aid
•
to increase the volume in both hearing aids.
Push the button on your left hearing aid to
•
decrease the volume in both hearing aids.
Volume setting
Recommended volume level
Turning volume up
Turning volume down
Maximum volume level
Minimum volume level
SmartFocus (comfort-clarity control)
If the push button has been configured as a
SmartFocus control:
Push the button on your right hearing aid
•
to increase the clarity of speech.
Push the button on your left hearing aid
•
to improve listening comfort.
Beeps
1 beep
short beep
short beep
2 beeps
2 beeps
21