Protecting The Environment - Black & Decker GSL200 Mode D'emploi

Guidelines for trimming (Australia & New Zealand)
Trim hedges and shrubs with seasonal leaves (new leaves
u
every year) in December and March.
Trim evergreens in September and February.
u
Trim conifers and other fast growing shrubs every six
u
weeks from October until March.
Maintenance
Your Black & Decker corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
After use, carefully clean the blades. After cleaning, apply
u
a film of light machine oil to prevent the blades from
rusting.
Storage
When the tool will not be used for several months, ideally
leave the battery connected to the charger. Otherwise proceed
as follows:
Fully charge the battery.
u
Store the tool in a secure and dry location. The storage
u
temperature must always remain in the range of +10 °C to
+40 °C.
Before using the tool after prolonged storage, fully charge
u
the battery again.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
(Original instructions)
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment.
Technical data
Voltage
Blade strokes (no load)
Blade length (shear)
Blade gap (shear)
Blade length (trimmer)
Blade gap (trimmer)
Blade brake time
Weight
Voltage
Blade strokes (no load)
Blade length (shear)
Blade gap (shear)
Blade length (trimmer)
Blade gap (trimmer)
Blade brake time
Weight
ENGLISH
GSL200 H1 GSL300 H1
V 3.6 3.6
DC
min 850 850
-1
cm 10 -
mm 23 -
cm - 15
mm - 8
s < 1 < 1
kg 0.65 0.65
GSL360 H1 GSL700 H1
V 3.6 7.0
DC
min 850 850
-1
cm 10 10
mm 23 23
cm 15 15
mm 8 8
s < 1 < 1
kg 0.65 0.65
9