Protecting The Environment; Technical Data - Black & Decker PH5551 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
downwards causing shallow patches in the hedge (Fig. E).
Take care to avoid any foreign objects. Especially avoid
u
hard objects such as metal wire and railings, as these
could damage the blades.
Regularly oil the blades.
u
Guidelines for trimming (UK & Ireland)
Trim hedges and shrubs with seasonal leaves (new leaves
u
every year) in June and October.
Trim evergreens in April and August.
u
Trim conifers and other fast growing shrubs every six
u
weeks from May until October.
Guidelines for trimming (Australia & New
Zealand)
Trim hedges and shrubs with seasonal leaves (new leaves
u
every year) in December and March.
Trim evergreens in September and February.
u
Trim conifers and other fast growing shrubs every six
u
weeks from October until March.
Cleaning, maintenance and storage
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do not
use any abrasive or solvent-based cleaner.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
After use and before storage
Regularly clean the ventilation slots with a clean, dry paint
u
brush.
To clean the appliance/tool/charger, use only mild soap
u
and a damp cloth. Never let any liquid get inside and
never immerse any part into liquid.
Remove debris using a hard brush.
u
Lubricate the blade with oil.
u
(Original instructions)
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com.

Technical data

Input Voltage
No-load speed
Blade Length
Blade brake time
Weight
Level of sound pressure according to EN ISO 11680-1, EN ISO 3744:
Sound pressure (L
) 90.3 dB(A), uncertainty (K) 2.5 dB(A)
pA
Sound power (L
) 100 dB(A), uncertainty (K) 2.5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Cutting freshly felled softwood (a
) = 1.792 m/s
h, W
EC declaration of conformity
MACHINERY DIRECTIVE
%
PH5551 Pole hedge trimmer
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC and EN 60745-1:2009+A11,
EN ISO 10517:2009+A1
Level of accoustic power according to 2000/14/EC
ENGLISH
PH5551
230
V
ac
3300
minˉ¹
515
mm
s
<1
4.1
Kg
2
2
, uncertainty (K) 1.5 m/s
9

Publicité

Table des Matières
loading

Table des Matières