European Compliance; Handling - Vortice QBK HE SAL Notice D'emploi Et D'entretien

ENGLISH

European compliance

elettrica").
All fans manufactured and supplied by Vortice
comply with the EC regulation 2006/95/EC (Low
Voltage), 2006/42/EC (Machinery), 2014/30/UE
(Electromagnetic compatibility),
(Ecodesign).
It is also extended for each particular range in
compliance with the required specific standards.
Regulations:
- UNE-EN ISO 12100-1: Safety
- UNE-EN ISO 12100-2: Safety
- EN ISO 13857: Safety
- ISO 13852: Safety
- UNE 100250 (ISO 12499): Industrial fans.
- ISO 3744: Acoustics.
- ISO 1940-1: Mechanical vibrations.
- ISO 10816-1: Mechanical vibrations.
Important: Rating label shows all the technical
features of the fan,
requirements and the max temperature. According
with rating label: don' t use this product with other
gas mix-compositions or different temperatures.
Anyway, this product cannot work in different
environmental conditions (differents from rating label).
Identifying the machine
A specific rating label is fixed on the external body
(external panel), for every product.
The rating label shows the produtc ID and main
technical features. Fig. 1 shows a sample ID plate and
index.
1 1
1
2
3
4
9
5
1 Type and model
2 Electric power supply
3 Power consuption
4 Number of revolutions per minute
5 Product code
6 IP motor protection
7 Absorbed current
8 Max environment Temperature
9 Logos: EAC, CE, Bin for WEEE
10 Insulation class of the motor
11 Continuous operation
12 Made in EU (Europe)
2009/125/EC*
including environment
6 10
7 11
12
8

Handling

Before moving the appliance, make sure that the
equipment being used has an adequate lifting
capacity. Use a fork lift truck and pallet to lift the
appliance. Alternativly, it's possible to lift the
appliance with eyebolts, as shown in fig. 2.
2 2
The appliance can be lifted manually in accordance
with the applicable legislation. When lifting the
appliance, take great care not to damage the side
panels. During transport and handling, the appliance
should remain in the vertical position and must never
be turned upside down or leaned over.
The weight of each model is shown in the table
shown in following tabels:
Description
Code
45765 HE SAL 250 EC 23,10
45766 HE SAL 315 4M 31,60
45767 HE SAL 355 4M 38,30
45768 HE SAL 400 4M 49,40
45769 HE SAL 450 4M 63,60
45770 HE SAL 500 4M 103,90
45771 HE SAL 315 EC 31,60
45772 HE SAL 315 4T
45773 HE SAL 355 4T
45774 HE SAL 400 4T
45775 HE SAL 450 4T
45776 HE SAL 500 4T
45777 HE SAL 560 4T
45778 HE SAL 630 4T
45779 HE SAL 710 6T
ø
8
HE 250
HE 315
HE 355
HE 400
HE 450
HE 500
ø
10
HE 560
HE 630
HE 710
Net Weight Gross weight
[Kg] [Kg]
26,10
34,60
42,30
53,40
68,60
108,90
34,60
31,50 34,50
38,20 42,20
49,30 53,30
73,60 78,60
109,90 114,9
140,90 146,90
174,40 180,40
231,50 237,50
11