Safety Barrier Removal; Door Trim Removal - Continental Fireplaces CBL36-1 Manuel Du Propriétaire

maintenance
EN
4.3

safety barrier removal

WARNING
!
• Glass may be hot. Do not touch glass until cooled.
• If equipped with door latches that are part of a safety system, they must be properly engaged. Do not
operate the appliance with latches disengaged.
• Facing and/or fi nishing materials must not interfere with air fl ow through air openings, louvre openings,
operation of louvres, or doors/access for service. Observe all clearances when applying combustible
materials.
• Before door is removed, turn the appliance off and wait until appliance is cool to the touch. Doors are heavy
and fragile so handle with care.
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the
appliance and must be installed.
Lift the safety barrier off the four shoulder screws and remove from the appliance. Reverse this step to install.
4.4

door trim removal

To remove, slide the back edge of the door trim up and out of the glass and door frame.
To install, slide the back edge of the door trim down between the glass and door frame. Insert downwards.
14
W415-1712 / A / 08.27.18
47.1