Care Of Glass; Care Of Plated Parts - Continental Fireplaces CBL36-1 Manuel Du Propriétaire

4.1

care of glass

WARNING
!
• Do not clean glass when hot! Do not use abrasive cleaners to clean glass.
WARNING
!
Buff lightly with a clean dry soft cloth to remove accumulated dust or fi ngerprints. Clean both sides of the glass
Firebox Glass Door :
after the fi rst 10 hours of operation with an ammonia-free glass cleaner.
• Do not clean glass when hot! Do not use abrasive cleaners to clean glass.
Do not use ammonia-based cleaners.
note:
Buff lightly with a clean dry soft cloth to remove accumulated dust or fi ngerprints. Clean both sides of the glass
Vinegar-based glass cleaners have demonstrated an ability to provide a clean, streak free glass surface.
after the fi rst 10 hours of operation with an ammonia-free glass cleaner.
4
Thereafter, clean as required. If the glass is not kept clean permanent discoloration and / or blemishes may
note:
result. Contact you local authorized dealer / distributor for complete cleaning instructions.
Vinegar-based glass cleaners have demonstrated an ability to provide a clean, streak free glass surface.
Razor blades, steel wool, or other metallic objects must not be used on both surfaces of the glass. Doing so
Thereafter, clean as required. If the glass is not kept clean permanent discoloration and / or blemishes may
can remove a thin layer of metal from the razor blades, steel wool, or other metallic objects that may then be
result. Contact you local authorized dealer / distributor for complete cleaning instructions.
deposited onto the coating. This can result in a discoloured stain or scratch-like mark. More importantly, this can
scratch the glass surface, thereby reducing its strength. Razor blades, steel wool, or other metallic objects must not be used on both surfaces of the glass. Doing so
can remove a thin layer of metal from the razor blades, steel wool, or other metallic objects that may then be
Do not operate the appliance with broken glass, as leakage of fl ue gases may result.
deposited onto the coating. This can result in a discoloured stain or scratch-like mark. More importantly, this can
Contact your local authorized dealer / distributor for complete cleaning instructions.
scratch the glass surface, thereby reducing its strength.
If the glass should ever crack or break while the fi re is burning, do not open the door until the fi re is out. Do not
Do not operate the appliance with broken glass, as leakage of fl ue gases may result.
operate the appliance until the glass has been replaced. Contact you local authorized dealer / distributor for
Contact your local authorized dealer / distributor for complete cleaning instructions.
replacement parts. DO NOT SUBSTITUTE MATERIALS.
If the glass should ever crack or break while the fi re is burning, do not open the door until the fi re is out. Do not
operate the appliance until the glass has been replaced. Contact you local authorized dealer / distributor for
replacement parts. DO NOT SUBSTITUTE MATERIALS.
Replacement glass/frame assembly shall be replaced as a complete unit as supplied by the appliance
manufacturer.
This appliance is factory equipped with tempered glass. Use only replacement parts as supplied by the appliance
manufacturer. DO NOT SUBSTITUTE MATERIALS.
4.2

care of plated parts

If the appliance is equipped with plated parts, you must clean fi ngerprints or other marks from the plated surfaces
before operating the appliance for the fi rst time. Use an ammonia-free or vinegar-based cleaner and a towel
to clean. If not cleaned properly before operating for the fi rst time, the marks can cause permanent blemishes
on the plating. After the plating is cured, the fi ngerprints and oils will not affect the fi nish and little maintenance
is required, just wipe clean as needed. Prolonged high temperature burning with the door ajar may cause
discolouration on plated parts.
note:
The protective wrap on plated parts is best removed when the assembly is at room temperature but this can
be improved if the assembly is warmed (i.e. using a hair dryer or similar heat source).
maintenance
5.1A
5.1A
6.1
W415-1712 / A / 08.27.18
EN
13