GYS ARTIC 8000 Manuel D'utilisation page 7

TROUBLESHOOTING
Troubleshooting
• Short-circuit.
1 • Open circuit.
• Polarity reversal
Unplug clamps or terminals during the
2
charge.
3 Battery voltage too high.
Battery is faulty or has a very low
4
voltage.
ARTIC 8000
Causes
• Make sure that there is no power consumption (normal or abnormal) in
the vehicle circuit.
• Check that the clamps are properly connected.
• After following these steps, if the indicator still does not light up, the
sulfated/damaged battery must be replaced.
Reconnect the charger to the battery.
Check that it is a 12V battery.
Change the battery.
Solutions
EN
7