Additional Information - England's Stove Works 25-CBEP Manuel D'installation Et D'opération

PLEASE NOTE:
The following additions to your owner's manual will enable you to achieve
optimal emissions performance from your stove. Important safety tips are also
included.
‐ Proper Installation – Please refer to the Installation section of your owner's manual and
follow the guidelines listed therein for safety and for optimal emissions performance.
Additional information:
Venting:
Be sure to follow your owner's manual's recommendation for venting, including the proper types
of flue systems and pellet vent pipe.
Also note that Outside Air Connection (combustion air) is MANDATORY for proper safe operation,
and to achieve optimal emissions performance.
Observe the vent termination clearances specified in your owner's manual, and contact our
Technical Support if you have any questions. Phone (800) 245‐6489 or email
service@englanderstoves.com .
Be certain that all aspects of the venting system are installed to the venting
manufacturer's instructions, particularly the required clearances to combustibles.
Your pellet stove operates on a negative draft system, which pulls combustion air
through the burn pot and pushes the exhaust air through the vent pipe and out of the
building. This unit must be installed in accordance with your owner's manual's detailed
descriptions of venting techniques; not installing the stove in accordance with the details
listed can result in poor stove performance (including poor emissions), property damage,
bodily injury or death. England's Stove Works is not responsible for any damage incurred due
to a poor or unsafe installation.
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING
CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR
DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.
PELLET –
Additional safety and emissions tips
EPA INFORMATION
53