Specifications; Heating Specifications; Epa Compliance; Dimensions - England's Stove Works 25-CBEP Manuel D'installation Et D'opération

Heating Specifications

 Heat Output Range** .............................................. 7,918 BTU/hr – 15,318 BTU/hr
 Approximate Pellet Burn Rate** ................................................................ 3.7 lb/hr
 Maximum Burn Time** .............................................................................. 30 hours
 Approximate Square Footage Heated*** ...................................... 800 - 2000 sq. ft.
 Hopper Capacity ....................................................................................... 45 pounds
EPA and Safety Compliance Specifications
 EPA Compliance ...........................Certified to comply with 2020 particulate
emissions standards using pellet fuel.
 U.S. Test Standard: US EPA 40 CFR Part 60, Subpart 60.536
 Particulate Emissions ........................................................................ 1.030 grams/hr
 Efficiency* ........................................................................................................ 63 %

Tested To ....................................................... UL 1482, ULC S627, ASTM E 1509
*- HHV overall result.
** - Heat output, burn rate and maximum burn time are heavily dependent on the type of pellets burned in the stove;
as such, these numbers may vary.
*** - The maximum heating capacity of this unit can vary greatly based on climate, construction style, insulation
and a myriad of other factors. Use this information in conjunction with a BTU loss calculation for your home to
determine if this unit will be sufficient for your needs.
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING
CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR
DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.

SPECIFICATIONS

DIMENSIONS

5