Cleaning & Maintenance - EQUATION DF-HT5C09P Notice De Montage - Utilisation - Entretien

e) When under the continuous heating mode, the machine will continuously to heat unless
FR
the overheat protection works or you turn it o . However, after continue working 12
hours, the machine will automatically turn o and enter standby mode.
ES
f) When under the continuous heating mode: press
then press
PT
Or press
IT
MEMORY FUNCTION IN STANDBY MODE:
EL
- Under the standby mode, press
settings(except timer setting) of last using and work accordingly.
PL
BRIGHTNESS of LED DISPLAY
- After working for 1 minute, the brightness of the LED display will reduce to 1/3 of the
RU
normal brightness, in order to avoid the problem of LED display dazzling at night. It will
resume to the normal brightness after operation.
UA
RO
5. CLEANING & MAINTENANCE
EN
(1) Before maintaining, please pull out the plug, and make sure the heater has become cool.
(2) Please use soft cloth to wipe the dust on the heater's surface; If the surface is too dirty,
please use soft cloth to wipe it with the water lower than 50˚C mixed with neutral
detergent.
(3) Don't use the gasoline, Thinner and any others which is easy to damage surface.
(4) Please cooling, dry up heater before packing, place it in dry and ventilate place.
key, the machine will display 35°C and quit the continuous heating mode;
key to shift into ECO mode.
key, the unit will memorize the previous
69
key to set the temperature, and