Temperature Control; Eco Function - EQUATION DF-HT5C09P Notice De Montage - Utilisation - Entretien

icker. At this moment, press
hours), the time will increase or decrease 1h for every press.
b) When entering into the timer setting mode, the timer you set before will not be changed.
But you can reset the time by pressing
will e ect at once.
c) If there is no operation to the keys after 5 seconds or press other keys except
and , the LED indicator
time. And the setting time will decrease down by per hour. When the timer decreases
down to "0", the machine will turn o and enter into standby mode.
d) If the timer set as "0", it means that no timer is set. LED indicator
and shows the setting temperature.

TEMPERATURE CONTROL

- In working condition, press
a) temperature setting: Press
the LED light will ash , You can change the temperature by pressing
key. The range of the temperature is from 5°C to 35°C, the temperature will increase or
decrease 1°C for every press.
b) After entering into temperature setting, the temperature you set before will not be
changed. But you can reset the temperature by pressing
to quit temperature setting, and the temperature that you have reset will be e ect at
once.
e) When set both the time and temperature, the LED display shows the setting temperature
and timer display interactively for each 30 seconds. When the time is not set, it only shows
the setting temperature.

ECO FUNCTION

- In working condition, press
will be on.
a) ECO mode: When entering into ECO mode, the setting temperature before entering is still
applicable. When the ambient temperature is lower than the setting temperature for less
than 2 °C, the machine will work with power I(1500W); When the ambient temperature is
lower than the setting temperature for no less than 2°C, the machine will work with
power II(2500W); If the ambient temperature reach the setting temperature, the heater
will turn o , the low/high heating power light will be o . (The rest of indicators will not be
changed.) Then if the ambient temperature is lower than the setting temperature for 2°C
that has been set, the heating function will be on again with the corresponding heating
power indicator will be on.
b) When you press
display "- -"and enter into continuous heating mode.
or key to set the timer (within a range of 0-12
or
light will be on, and
key enter into temperature setting.
key ,the temperature indicator light
key to shift the product into ECO mode, indicator
key after the setting temperature value 35°C, the machine will
key, and timer that you have reset
will show the setting
or key. Press
68
light will be o ,
will be on,
or
key
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN