Brüel & Kjær 2240 Guide De L'utilisateur page 20

Sonomètre intégrateur
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

14
Integrating-averaging Sound Level Meter Type 2240 – User Guide
4) Slide the compartment cover back into place.
5) Switch the Power on. The battery symbol in the bottom left-hand corner of the instrument
display should indicate a full battery level
check that you have inserted the batteries correctly.
The battery level has two black columns, each representing about 8 hours of remaining battery
time for a total of approximately 16 continuous hours of use (at room temperature). In extreme-
ly cold or hot environments, the remaining time may be less.
Both columns will be shown in the indicator when the battery level is full. It is time to replace
the batteries when the indicator is empty and flashing.
Caution:
It is possible for batteries to explode or leak if they are handled incorrectly, so:
For long-term storage, remove the batteries and keep the sound level meter in a dry place
Never mix different makes or types of battery
Never mix charged and discharged batteries
. Note: If the instrument does not turn on,

Publicité

Table des Matières
loading

Table des Matières