Upgrade Menu - Promax PROLITE-60 Manuel D'utilisation

5.2.2 UPGRADE menu

Turn and press the rotary selector [8] to select the desired option:
Manual Upgrade:
Automatic Upgrade:
NOTE
In order to activate the automatic update process, previously must be configured
suitably the network parameters and later to select: FUNCTIONS
AUTOMATIC.
The PROLITE-60 is connected to the PROMAX WEB SITE and looks for the last
version of software available.
In order to carry out a manual update, previously the versión file of corresponding
software is due to load in the equipment, following the steps that are described next:
In case of using RS-232C port:
1. Connect a cable series between the PC and the PROLITE-60.
2. Execute in the PC a terminal emulator (e.g.: Hyperterminal, TeraTerm, etc..)
and set the connexion to 19200 bauds, 8 bits, without parity and 1 stop bit.
3. Press ENTER, when it asks for the user name (default login) enter: serial
4. Send from the emulator the corresponding file of extension: .asc and press
Ctrl.+D.
Page 22
Figure 11.- UPGRADE Menu.
It activates the process of automatic update through port series
(RS-232C) [24] or Ethernet network connection [26].
It activates the process of automatic update through ethernet
network connection [26].
USER'S MANUAL. PROLITE-60
UPGRADE
09/2007