Web Server; Traces Function - Promax PROLITE-60 Manuel D'utilisation

USER'S MANUAL. PROLITE-60

6 WEB SERVER

It allows the remote access to the instrument functions through a local network,
for it:
1) Set the local network parameters in the PROLITE-60 (IP, type of server, etc..).
2) Connect the PROLITE-60 to the network.
3) Access to the instrument Web Server by means of a browser, connecting to the
local network and acceding to the IP specified for this instrument.
The PROLITE-60 Web Server offers the following functions:
Traces: Offers measurement data from memorised traces.
Images: Visualisation of previously captured traces.
Remote Mode: Visualisation operations for traces in remote mode.
Upgrade: Allows to recover the previous firmware updated files.
6.1

TRACES function

The option Recover Traces allows to recover the data relative to the memorised
measurement traces, for each type of measurement: WDM, DFB, LED, FP or OA, is
available up to nine trace memories, and when selecting this option will appear a listing
of all the registered values.
09/2007
Figure 21.- PROLITE-60. Web Server.
Page 33