Promax PROLITE-60 Manuel D'utilisation page 70

3.- Relative measuring mode:
In order to view a trace in relative mode, that is a trace to represent the ratio
between the input signal measurement (trace 0) and the memory trace (traces 1
from 9):
1.- Set on the trace that you wish to relativize (from 1 to 9).
2.- Press the [*] key.
It will appear on screen the squared icon
the trace used to relativize the input signal.
In order to exit from this mode, press the [*] key.
4.- Measurement type selection (trace 0):
When pressing in a sequential way the TRACE [4] key is possible to select
the input signal acquisition type:
Signal
Max hold
Min Hold
Average
5.-Picture capture:
When a double click is done by the rotary selector [8], the PROLITE-60
saves an full screen image in (JPEG) format.
This picture is registered by means of a numerical value and could be recalled
through the Web Server using a PC connected to the local network.
Page 16
Detected signal.
Signal maximums memorisation, appears the " " symbol in the
trace identifier icon.
Signal minimums memorisation, appears the " " symbol in the
trace identifier icon.
Average of signal values. It appears the symbol (µ) in the trace
identifier icon.
Figure 5.- TRACE control.
USER'S MANUAL. PROLITE-60
*
witch colour corresponding to
09/2007