Erreka CICLON Manuel De L'installateur page 47


Procedure
Position the wall support and the operator
1 Choose screws which are suitable for the place of
attachment (metal, brick, wood, etc) and the weight
and effort of the operator.

Use appropriate screws.
2 Mark the points to bore in the wall.

Before marking the position of the needles,
ensure the assembly dimensions and positions are
respected, see "Fig. 4 Example of assembly position
for operator with sliding arm" and "Fig. 5 Example
of assembly position for operator with articulated
arm".
3 Bore the points (1) marked.
4 Attach the operator (2) to the fixing plate (3) using
the screw-nut sets (4).
5 Mount the operator and support on the wall using
appropriate screws.
CICLÓN Electromechanical Operator
INSTALLATION
43