Klarstein 10035085 Mode D'emploi page 25

a) Remove:
1. Use the handle provided (9) to remove the grill rack (1 1). Insert it from above into
the handle holder provided.
2. Now carefully pull the grill rack (1 1) forward out of the grill rack holder (13).
3. The grill rack (1 1) is very hot. Only place it on a heat-resistant surface.
b) Insert:
1. Use the enclosed handle (9) to insert the grill rack (1 1). Insert it from above into the
handle holder provided.
2. The grill rack holders (13) on the left and right of the grill allow you to choose
between 7 insertion heights. When choosing the insertion height, make sure that
the dimensions of the food to be grilled match it and that it does not stick to the grill
housing or come into contact with the heating element (6) during insertion.
3. Now push the grill rack (1 1) carefully into the grill rack holder (13).
4. Remove the handle (9) so that it cannot heat up during the grilling process.
Grease drip tray (10)
1. Place the grease drip tray (10) on the bottom of the grilling chamber (12) to catch
any liquids dripping from the food being grilled.
2. Use the handle (9) provided to insert or remove the grease drip tray (10). Insert it
from above into the handle holder provided.
Please note that the grease drip tray
(10) must always be inserted so
that the handle receptacle (arrow)
points forward. Only in this way is it
possible to use the handle (9).
EN
25