topmark UP Mode D'emploi page 10

ASSEMBLING
PLACING THE UP SEAT ON A CHAIR
Use the two straps attached at the sides of the base of the seat (A-A) to attach the
Up Seat to the seat of the chair. Make sure that the straps are between the front and
back legs of the chair. Place the Up seat on the chair and adjust the two straps so
that when the buckles are clipped together the seat is firmly held on to the chair.
lf it is too loose, shorten the traps by pulling on the free end.
An audible click should be heard when the buckle is correctly closed.
Repeat the above procedure to connect the straps attached to the back of the Up
seat (B-B) to the back of the chair. lf the back of the chair is open tubular wind the
straps around the tubes on each side before connecting the buckle at the back.
EN
Check to make sure the seat is firmly fixed tot the chair.
10