Compliance With Standards; Recycling Information - Visonic VGSM-120 Mode D'emploi

COMPLIANCE WITH STANDARDS

Hereby, Visonic declares that the VGSM-120 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. The complete R&TTE Declaration of Conformity for each Device
can be found at www.visonic.com.
Installation of these systems must be carried out strictly in accordance with the instructions described in
this manual, and in compliance with the local laws and bylaws in force. The above mentioned VGSM-120
has been designed and made to the highest standards of quality and performance. The manufacturer
recommends that the installed system should be completely tested at least once a month.
VISONIC ltd shall not be responsible for damage arising from improper installation or maintenance by
unauthorized personnel.
VISONIC ltd reserves the right to change the technical specifications of this product without prior notice.

Recycling information

VISONIC recommends that customers dispose of their used equipment (panels, detectors, sirens, and other
devices) in an environmentally sound manner. Potential methods include reuse of parts or whole products
and recycling of products, components, and/or materials.
For specific information see http://www.visonic.com.
Waste Electrical and Electronic Equipment (WEEE) Directive
In the European Union, this label indicates that this product should NOT be disposed of with household waste. It should be
deposited at an appropriate facility to enable recovery and recycling.
For specific information see http://www.visonic.com
To program this device use the software VGSM-120 Console ver. 3.0 or higher.
4 D-305708 VGSM-120 Installation Instructions