Voice Dialer; Periodic Voice - Visonic VGSM-120 Mode D'emploi

Voice Dialer

This section is used to program all parameters relating to the voice dialer, namely: the telephone numbers to call
(the first 8 numbers in the phonebook), the number of repetitions for each message (minimum 1, maximum 8),
the duration and number of the messages in accordance with the following specifications:

Description: This column lists the events for which a voice message may be programmed.
Note: To select voice messages for the 3 programmable input lines, set the corresponding terminal as
an input (see I/O->Type).

Telephone numbers: Click the '12345678' columns in accordance with the desired event. The tick 
indicates that a particular telephone number will be called when an event occurs. Click the boxes to
enter/remove the tick .
Note: The telephone numbers are the first 8 entries on the "Phonebook" page.

Voice Message: Triple-click the 'Message' column corresponding to the desired event, then click the button
to scroll through the list of messages (up to 8 messages can be selected, each with a maximum duration
of 16 seconds) and select one. Up to 3 voice messages can be selected for each event (Message#1,
Message#2, Message#3).

Repeat Call: This field is used to enter the number of attempts to be performed (up to a maximum of
8) if the call is not successful.

Repeat Message: This field is used to enter the number of times a message is repeated (up to a
maximum of 8) when the call is answered.

Call All Numbers: Select this option  to call all telephone numbers programmed for an individual
event and play the voice message assigned to it. If this option is not selected , the dialer will end the voice
calls as soon as one of them has been completed successfully.

Call Confirmation: Select this option if you want the dialer to wait for confirmation from the remote user
that the voice message has been received, otherwise the dialer will attempt to deliver the voice message
again: the remote user can send confirmation by pressing the
touch-tone keypads).
CAUTION! By pressing the
current telephone call and any others in progress may be blocked.
CAUTION! In some cases the dialer may misinterpret the answer from answering machines, ringback tones,
GSM operator courtesy messages, etc. Users are advised to enable the "Call Confirmation"
function.

Periodic voice

This section is used to program periodic voice message options.
Note: You MUST enter the "SIM Phone Number" and enable the "Auto Clock Adjusting" in the
"Options" page to setup the Periodic Voice's options.

Date of first send: Select the date on which the first periodic voice message is to be sent.

Time of first send: Select the time at which the first periodic voice message is to be sent.

Interval: Enter the interval (HH-DD) at which subsequent periodic voice messages are to be sent. The
interval consists of the following values:
o (HH) next message time - Select the hour value for the next periodic voice message. The interval
for these values may be set between 0 and 23.
o (DD) next message day - Select the day value for the next periodic voice message. The interval for
these values may be set between 0 and 365.

Update time: Select this icon to get local date and time from the PC.
26
button on your own telephone when listening to a voice message, both the
button on his/her telephone (only applies to
D-305708 VGSM-120 Installation Instructions