Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Optional Tamper Programming
Through the connection (see section Connecting the device->Auxiliary connections) of MAXIASNC tamper
switch (optional) you can detect the Communicator cover opens. To send a SMS and/or voice message to
one or more telephone numbers when the Communicator cover is removed, perform the following setup, by
means of the VGSM-120 Console.
1.
In the Phonebook page, enter the telephone numbers for the tamper message.
2.
In the I/O page, set the T3 terminal as Input (Type column) with NO (Normally Open) standby status
(Polarity column): the standby status of the tamper switch is Normally Closed.
3.
In the SMS dialer and/or Voice dialer page set, for the Input 3 Event, the SMS and/or the Voice
message, and the required telephone numbers.
D-305708 VGSM-120 Installation Instructions
29
Publicité
Table des Matières
