Drain Hose Connection - Bosch SHI Instructions D'installation

Drain Hose Connection

DRAIN HOSE CONNECTION
The dishwasher drain hose may be connected to the drain
plumbing in one of four ways:
1) Directly to the undersink dishwasher drain connection,
as shown in Figure 22.
2) Directly to a disposer dishwasher drain connection, as
shown in Figure 23.
3) To the undersink dishwasher drain connection through
an air gap, as shown in Figure 24.
4) To a disposer dishwasher drain connection through an
air gap, as shown on Figure 25.
Information on installing air gaps and disposers can be
Figure 22 Figure 23
found in the Plumbing Preparation section of this manual.
NOTE: If the dishwasher drain hose is to be connected to a
disposer dishwasher drain connection, remove the plug
from the disposer's dishwasher drain connection.
Use the supplied Rubber Connection Hose and Drain Hose
Clamps (letter G in the Materials Supplied section of this
manual) to connect the dishwasher drain hose to the
plumbing drain connection. Use the spring clamp to secure
the Rubber Connection Hose to the dishwasher drain hose.
Use the screw clamp to secure the Rubber Connection
Hose to the plumbing drain connection.
If the dishwasher drain hose is connected directly to either
an undersink dishwasher drain connection, as shown in
Figure 22, or to a disposer dishwasher drain connection, as
shown in Figure 23, form a curve in the dishwasher drain
hose and secure a portion of the curve at least 20"
Figure 25
Figure 24
(508mm) above the cabinet floor.
11