Electromagnetic Compatibility - Comeg SOPRO 218 Manuel D'utilisation

11 Electro-magnetic
compatibility
Guide and declaration by manufacturer – electromagnetic emissions
The reference system, «Xenon light source» is designed to be used within the electromagnetic
environment specified below. The user should ensure that it is indeed used within this environment
WARNING: Avoid using this device next to other devices or stacked with them; this could cause
a malfunction. If this use is unavoidable, this device and the other devices should be kept under
observation for normal operation.»
WARNING: The use of accessories, transducers and cables other than those specified or supplied
by the manufacturer of this device may cause an increase in electromagnetic emissions or reduce
the immunity of the device and cause incorrect operation.
Emissions test
Disturbance of
electromagnetic
radiation
(Radiated Emissions)
CISPR 11
Disruptive voltage
on the power-supply
terminals
(Conducted emissions)
CISPR 11
Emission of harmonic
currents
IEC 61000-3-2
Variations of voltage,
fluctuations and flicker
of voltage
IEC 61000-3-3
Compliance Electromagnetic environment - guide
The reference system, « Xenon light source « only
uses radioelectrical energy for its internal subsystems.
Group 1
Therefore, it emits very low RF energy and is not likely to
interfere with nearby electronic devices.
Class B
Conform
The medical device is suitable for use in a professional
health care facility environment.
Conform
19