Basic Picture Adjustments - Pioneer KURO KRP-600A Mode D'emploi

Setting up

Basic picture adjustments

Adjust the picture to your preference for the chosen AV Selection
option (except DYNAMIC).
1 Repeat steps 1 to 3 provided for
2 Select an item to be adjusted (/ then ENTER).
Picture
AV Selection
Contrast
Brightness
Colour
Tint
Sharpness
Pro Adjust
Reset
If you select "OPTIMUM" for "AV Selection", the following submenu
appears on screen.
Picture
AV Selection
PureCinema
Sound Control
OPTIMUM Performance
Reset
For PC source, the following screen appears;
Picture
AV Selection
Contrast
Brightness
Red
Green
Blue
Reset
3 Select the desired level for AV Selection options other than
"OPTIMUM" (/).
Contrast
When the bar is in display, you can also change the item to be
adjusted, by pressing /.
4 Press HOME MENU to exit the menu.
AV Selection .
: STANDARD
: 40
: 0
: 0
: 0
: 0
: OPTIMUM
: Off
: STANDARD
: 40
: 0
: 0
: 0
: 0
32
For AV source
 button
Item
For less contrast
Contrast
Brightness For less brightness
For less colour intensity For more colour
Colour
Skin tones become
Tint
purplish
Sharpness For less sharpness
For PC source
 button
Item
For less contrast
Contrast
Brightness For less brightness
Red For weaker red
For weaker green
Green
Blue For weaker blue
Note
• To perform advanced picture adjustments, select "Pro Adjust"
in step 2 and then press ENTER. For the subsequent procedures
see Advanced picture adjustments on page 40.
• To restore the factory defaults for all items, press / to select
"Reset" in step 2, and then press ENTER. A confirmation screen
appears. Press / to select "Yes", and then press ENTER.
• You may experience a sudden change in the image position and
screen brightness when you open the "Picture" menu.
• Pressing TOOLS also causes the "AV Selection" menu to
appear.
• If you have selected "DYNAMIC", you cannot select "Contrast",
"Brightness", "Colour", "Tint", "Sharpness", "Pro Adjust", and
"Reset"; these menu items are dimmed.
• Selecting "OPTIMUM" causes optional menus to appear:
"Sound Control" and "OPTIMUM Performance" (page 45).
• When "OPTIMUM" is selected, images are reproduced based on
the information collected at the Room Light Sensor, as well as
the colour sensor (when in use).
08
 button
For more contrast
For more brightness
intensity
Skin tones become
greenish
For more sharpness
 button
For more contrast
For more brightness
For stronger red
For stronger green
For stronger blue
39
En