NEC MultiSync LCD4010 Manuel Utilisateur page 29

OSM Controls-Configuration2
OSM TURN OFF
INFORMATION
OSM
OFF TIMER
DVI MODE
*:INPUT RGB1 only
OSM POSITION
INPUT DETECT
MONITOR
INFORMATION
CONFIGURATION 2
OSM TURN OFF
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSM TURN OFF
INFORMATION OSM
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION + -:ADJ
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
CONFIGURATION 2
INFORMATION OSM
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSM TURN OFF
ON
INFORMATION OSM
OFF TIMER OFF
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL + -:ADJ
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
CONFIGURATION 2
OFF TIMER
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSM TURN OFF ON
INFORMATION OSM
OFF
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL + -:ADJ
:SEL SET :NEXT :RETURN :EXIT MENU
EXIT MENU
CONFIGURATION 2
DVI MODE
OSM TURN OFF
INFORMATION OSM
OFF TIMER
DVI-PC
DVI MODE
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
+ -:SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
CONFIGURATION 2
OSM POSITION
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSM TURN OFF
INFORMATION OSM
LEFT
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
+ - :ADJ
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
CONFIGURATION 2
INPUT DETECT
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSM TURN OFF FIRST
INFORMATION OSM LAST
OFF TIMER VIDEO
OSM POSITION NONE
INPUT DETECT
MONITOR INFORMATION
:SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
CONFIGURATION 2
MONITOR INFORMATION
LONG CABLE ON/OFF
LONG CABLE MANUAL
MODEL NAME:
OSM TURN OFF
INFORMATION OSM
SERIAL:
OFF TIMER
12315XXX
OSM POSITION
INPUT DETECT
MONITOR INFORMATION EXIT
:SEL SET :NEXT :RETURN :EXIT MENU
EXIT MENU
English-25
The OSM control menu will stay on as long as it is in
use. In the OSM Turn Off submenu, you can select how
long the monitor waits after the last touch of a button to
10 SEC.
shut off the OSM control menu. The preset choices are
EXIT :RETURN MENU :EXIT MENU
10 -240 seconds.
Selects whether the information OSM is displayed or
not. The information OSM will be displayed when the
input signal or source changes. the information OSM
10 SEC.
will also give a warning when there is no-signal or
the signal is out-of range.
:RETURN :EXIT MENU
EXIT MENU
A time between 3 to 10 seconds is available.
To select OFF TIMER mode ON/OFF.
In the OFF TIMER menu, you can preset the
monitor to automatically power down.
1 HOUR
A time between 1 to 24 hours is available.
When the OFF TIMER is set, the SCHEDULE
EXIT :RETURN MENU :EXIT MENU (see page 27) settings will be disabled. OFF TIMER is
not reset when monitor is shut off.
Selects the kind of DVI-D equipment which is connected
to RGB1.
/ DVI-HD
Select "DVI-PC" when PC or other computer equipment is
connected.
EXIT :RETURN MENU :EXIT MENU
Select "DVI-HD" when DVD player which has DVI-D
output is connected.
Adjusts the position of the OSM menu.
UP
Press + button to move right side of the screen.
RIGHT
Press - button to move left side of the screen.
Press button to move top side of the screen.
DOWN
EXIT :RETURN MENU :EXIT MENU
Press button to move down side of the screen.
Selects the method of input detection when more than
two input devices are connected.
FIRST DETECT: When the current video input signal is
not present, then the monitor searches for a video signal
from the other video input port. If the video signal is
present in the other port, then the monitor switches the
video source input port to the new found video source
automatically. The monitor will not look for other video
signals while the current video source is present.
This function is available at input RGB 1/2/3.
LAST DETECT: When the monitor is displaying a signal
from the current source and a new secondary source is
supplied to the monitor, the monitor will automatically
DETECT
switch to the new video source. When current video
DETECT
DETECT
input signal is not present, the monitor searches for a
video signal from the other video input port. If the video
EXIT :RETURN MENU :EXIT MENU
signal is present in the other port, then the monitor
switches the video source input port to the new found
video source automatically.
This function is available at input RGB 1/2/3.
AV
VIDEO DETECT: DVD/HD or VIDEO inputs will have
priority over RGB1/2/3. When DVD/HD or VIDEO
input signal is present the monitor will change and keep
to the DVD/DH or VIDEO input.
NONE: The Monitor will not search the other video
input port.
Indicates the model and serial number of your
LCD4010 monitor.
:RETURN :EXIT MENU
MENU